Aqua Sure Water Purifier Nano RO

Product Dimensions: 28.1 x 19.8 x 41.3 cm ; 7 Kg
Item model number: Aquasure Nano RO

Purifying Technology Reverse Osmosis (RO)
Applicable TDS Range in Input Water 500 - 2000 mg/litre
Recommended for Salty/Khaara/Brackish water
Check suitability for your water type here
Filtration / Purification Modules
(Click on modules to know more) I-Cartridge?, Chemi Block?, EMLE?, Reverse Osmosis Membrane?, Post Carbon Cartridge?
Installation Type Table Top, Wall Mounting
Purified Water Flow Rate* 12 litre/hour
Storage Tank 4 Litres
TDS Reduction 90% (approx)
% Water Recovery 25% (approx)
Dimensions (W X D X H) in mm 281x198x413
Net weight 7 Kg
Operating/Input Voltage 230 V AC/50HZ
Power Rating/Consumption 30 Watts
See more Technical Specifications

Note: Technical Specifications are subject to change without prior notice.

* Flow rate depends on the input water pressure and condition of the filters.

*If the water pressure you receive is higher than the maximum specified, the use of a pressure reducing valve is recommended. The above accessory is available with our company at an additional cost.

*If the water pressure you receive is lower than the minimum specified, the use of an external pump attachment is recommended. The above accessory is available with our company at an additional cost.

Please check TDS level in input water before installation of RO purifier.

RO Purifier is suitable for input TDS: 500 – 2000 (PPM)